Separate names with a comma.
We provide the best Electrical Services you will need.
I bought VLt Lndscp Lt 9-piece Path,Area Light Kit from Cosco 6spot+3path.Exp to 4 more spot .Can I add 4 more area light with a extra hub
Hey Neeraj, with the 150W transformer in that kit, you have about 80 watts of remaining space to add additional lights (this is with all of the pre-provided lights in the kit being used).
New lighting novice
Big project planned
Is it possible to run two separate circuits, one on a photocell and one switched, with a single transformer?
I have a photo but need to figure out how to attach here.
I’m wanting to add some spotlights on my house. What product would you recommend and positioning?
We have a lot of spotlights to choose from so, it really comes down to personal preference. I can provide more info in a different area. To answer your other post as well, you can post photos and more content in general in a forum post; this thread is essentially like a profile 'wall' on Facebook and is limiting.
How do I know what size transformer to get? Would I just add up the Watts of the bulbs to know?
That's correct! You start by adding up the total wattage of all of your lights. With that number in hand, you'll want to keep in mind that we recommend no more than 80% of a transformers capacity be used. So, if you had 140W of lights, a 150W transformer would not be recommended; you'd need a 300W for safe operation which would also allow for expanding in the future if desired.
What size 12 volt system transformer do I need to support up to approximately 30 lights?
Hey there Lee,
The size of the transformer you'd need would ultimately be dependent on the total combined wattage of all the LED lights you will use. With that amount of lights, you will ATLEAST need a 150W transformer - possibly a 300W depending on the actual power consumption. Also, when deciding, keep in mind that we always recommend no more than 80% of a unit's maximum capacity be consumed as well.
I'm going to go ahead and direct message you through 'conversations' so that I can fit more characters in my response (the profile posts are different from private conversations or public forum posts). Also, for the best feedback, its usually best to post in the main area of the forum and maybe attach a single photo of your house from a distance!
also will a 150 watt slim line transformer accommodate 6 well/spot lights and 6 (6in) hardscape wall lights?
Want to do lighting project around pool. One side of pool has all natural stone rocks. I was thinking either well lights or Fat Boy spots?
A low-profile option would be (2) Salty Dog Integrated Well Lights. Exactly what to use and how to use it really depends on the effect you are trying to achieve and your personal budget. If you had any further product or installation related questions be sure to let me know! (2/2)
With a tree of that size, for lighting from the base, you could consider using one Infiniti 60 spotlight on either side of the trunk (the 3rd generation offers slightly higher lumen output but, the G4s could also work). You could also consider using (2) 12V 10W LED floodlights at the base; the powerful, widespread light outputs would do well to illuminate both the trunk and the wide canopy. (1/2)
How to best uplight a35 foot wide 25 ft high cherry tree
If you need more help troubleshooting, please let me know! Or, if you ultimately determine what the issue is, be sure to call in to our support team so that we can quickly get you taken care of! (3/3)
Be sure to double check the wire connections on these lights, and check the voltage readings if possible (with your voltmeter set to AC for alternating current you should get anywhere from 11-15V). If the connections and voltage readings check out fine, I would then recommend swapping out a light bulb from a working fixture if possible to determine if it is either your light bulbs or the fixtures themselves. (2/3)
I'm sorry for any troubles that you may be experiencing with your system. I myself am more than happy to help troubleshoot or, you could also contact our customer support line directly if you would prefer to speak over the telephone.
If the lights which aren't working are all on the same wire run, it may be the result of a faulty connection, damaged wire, or a lack of power. (1/3)